- For use with all Pawz Away systems
- Lightweight collar is comfortable for cats and dogs 5 lbs and up with neck sizes 6″- 28″
- Safe for indoor or outdoor use
- Uses progressive static correction to adjust to pet’s sensitivity
- Collar also comes with (2) 3-Volt Lithium Batteries, Operating and Training Guide and Test Light Tool
Until pets take a clue from fashionistas and start to share clothes, keeping four additional paws from snooping where they shouldn’t will require an additional collar. The PetSafe Pawz Away Extra Indoor/Outdoor Collar is a waterproof receiver collar that delivers harmless, progressive static correction to make sure curious cats and dogs stay away from no-no areas like gardens and rugs.
Specifications
| Item Number | 78410 |
|---|---|
| Range of Coverage | Dependent on system |
| Lifestage | Adult, Puppy, Senior |
| Breed Size | N/A |
| Features | Adjustable Correction, Indoor, Waterproof, Wireless |
| Collar Type | Fence System – Noise, Fence System – Static |
| Neck Size | 6 to 27 inches |
| Recommended Pet Weight | 5 pounds & up |
| Compatibility | Battery Powered |
Precautions
Avoid leaving the collar on for more than 12 hours a day. Please refer to packaged instructions for additional details.
I can’t hear the Receiver Collar tone.
- Check or replace batteries in Receiver Collar.
- Pets easily hear tone but it may be a volume level that is difficult for you to hear.
- Use the Test Light Tool to check Receiver Collar for static correction.
My pet does not react to the stimulation.
- Check/replace batteries in Receiver Collar.
- Use Test Light Tool to check for static correction.
- Check Receiver Collar fit to ensure Contact Points have direct skin contact.
- Check the setting on the Barrier Transmitter.
The Barrier Area range is too low or too high.
- Check/replace batteries in Receiver Collar.
- Adjust Barrier Transmitter range to increase/decrease Barrier Area size.
- Check for metal objects close by.
The Barrier Transmitter does not appear to work.
- Check segment indicator on Barrier Transmitter.
- Check/replace batteries in Barrier Transmitter.
- Increase the Barrier Area range on the Barrier Transmitter.
- Check that the Barrier Transmitter setting corresponds to the Receiver Collar setting. (i.e. Barrier Transmitter is set to mode A and Receiver Collar is synchronized to pick up mode A).
There are no segments on the Barrier Transmitter.
- Press the UP (+) arrow button.
- Check/replace batteries in Barrier Transmitter.





















Reviews
There are no reviews yet.