- Inner orthopedic foam is wrapped in water-resistant PVC that stands up to outdoor elements and dries quickly.
- Great for dog houses, porches, garages, barns or in the home, can be used indoors or outdoors.
- Thermostatically controlled to warm to your pet’s normal body temperature.
- Includes a fleece cover that removable and washable.
- Features a 5.5-foot steel-wrapped cord and is MET listed for safety.
The first soft, outdoor heated bed on the market! The Lectro-Soft is extremely low wattage. Perfect for doghouses, basements, garages, barns, sheds, porches or any other outdoor shelter. This soft, orthopedic bed is unique in that it will still provide soft, comfortable warmth even in sub‐zero weather! Super soft PVC is used on the exterior to ensure the bed doesn’t absorb water and stay wet like a fabric bed would. Indoor or Outdoor use.
| Item Number | 614030 |
|---|---|
| Weight | 2.7 pounds |
| Dimensions | 19.25 x 9.5 x 2.5 inches |
| Lifestage | Puppy, Adult |
| Breed Size | Medium Breeds |
| Features | Heated, Water-resistant, Machine-washable, Removable Cover |
| Material | Fleece, Plastic, Synthetic Fabric |
| Recommended Pet Weight | Medium |
Heated bed, super-soft removable cover.
Not recommended for destructive pets. Consult your veterinarian before use with young puppies/kittens, convalescent pets, during surgery/surgery recovery, or any animal that cannot voluntarily remove themselves from the heated pad. Do not place pad in confined area where the pet does not have the ability to remove themselves from the pad. Always allow your pet enough space to be able choose if they want to rest on the pad or off the pad.
- Suitable for use in the home, garage, porch, kennel or pet house.
- Place the Lectro-Soft directly on a hard, flat surface in your home or inside a doghouse or kennel. The area chosen should be sheltered from direct rain or snow.
- Pull out the air valve on the bottom side of the bed. Plug into 110 – 120 volt AC outlet while the air valve is still released. Allow 15 to 30 minutes for the Lectro-Soft™ to begin to warm and fully expand. The unit will feel slightly warm to the touch.
- After desired expansion, push down on the center of the bed to remove a little air. Then push in the air plug to seal the bed. This will prevent a ballooning effect when your pet is enjoying the bed.
- After initial warm-up, your Lectro-Soft will feel cooler to the touch. This is the intention for energy efficiency. When your pet lies on the bed, it will warm to a comfortable temperature in even the coldest of weather.
- The Lectro-Soft Outdoor Heated Bed does not inflate, as many people believe. After opening the air valve, you will not notice a big difference in size, but the bed will expand slightly. All the air is removed from a Lectro-Soft bed when vacuum packaging it for shipment. Opening the air valve allows air back into the bed, which helps the inner foam gradually expand to its original size. This process can take up to 24 hours, depending on how long the bed has been vacuum packed.
- Wash the faux fleece cover on the gentle cycle with cold water, then line dry. The bed can be cleaned using a damp towel or sponge and mild dish washing detergent. Do not wash in a washing machine.

























Reviews
There are no reviews yet.